Step 3. Install The Extended Paper Width Slider - Plustek SmartOffice PS286 Plus User Manual

8. Follow the on-screen instructions to complete the scanner calibration. After the
calibration is complete, click OK and then click Finish.
9. After the installation is complete, close all open applications and click the Finish
button to restart your computer.
Attention

Step 3. Install the Extended Paper Width Slider

1. Open the ADF cover by pulling the lever, and get the right and left extended
paper width sliders ready.
2. Align and Insert the left extended paper width slider onto the paper width slider
on the left. Position and Insert the right extended paper width slider onto the
paper width slider on the right.
3. Close the ADF cover by pushing it back down until it snaps back into place.
Save the Setup/Application DVD in case you
need to reinstall the driver and software in
the future.
Save the Calibration Sheet in case you need
to calibrate the scanner in the future.
12