Table of Contents
Advertisement
misgiving at your scanner functioning.
6. When the system completes the installation, click the Finish button.
7. Follow the on-screen instructions to install all software that your new scanner
requires.
8. After the software is installed, close all open applications and click the Finish
button to restart your computer.
9. After the computer is restarted, you will be prompted to perform the scanner
calibration.
10. Insert the special calibration sheet into the ADF of the scanner, with arrows toward
the scanner buttons.
11. Follow the on-screen instructions to complete the scanner calibration.
After the calibration is complete, click OK and then click Finish.
Information
S
t
e
p
3
.
I
n
s
t
a
l
S
t
e
p
3
.
I
n
s
t
a
l
1. Open the ADF cover by pulling the lever, and get the right and left extended paper
width sliders ready.
2. Align and Insert the left extended paper width slider onto the paper width slider on
the left. Position and Insert the right extended paper width slider onto the paper
width slider on the right.
If the scanner installation is not started and
displayed automatically on the screen, click
Start, select Run and type in D:\Install (where
D: is the drive letter assigned to the CD-ROM
drive of your computer.)
l
t
h
e
E
x
t
e
n
d
e
d
l
t
h
e
E
x
t
e
n
d
e
d
P
a
p
e
r
W
i
d
t
h
S
P
a
p
e
r
W
i
d
t
h
S
11
l
i
d
e
r
l
i
d
e
r
- Quick Links:
- Calibrating the Scanner
Hide quick links:
Advertisement
Table of Contents
