Step 3. Install The Extended Paper Width Slider; Step 4. Install The Stacker - Plustek PS388U User Manual

Attention

Step 3. Install the Extended Paper Width Slider

1. Open the ADF cover by pulling the lever, and get the right and left extended
paper width sliders ready.
2. Align and Insert the left extended paper width slider onto the paper width slider
on the left. Position and Insert the right extended paper width slider onto the
paper width slider on the right.
3. Close the ADF cover by pushing it back down until it snaps back into place.

Step 4. Install the Stacker

Insert the tabs on the stacker onto their slots on the scanner.
Information
10
Extended Paper Width Slider is not included in all scanner models.
Save the Setup/Application DVD in case you
need to reinstall the driver and software in
the future.
Save the Calibration Sheet in case you need
to calibrate the scanner in the future.
The installation of stacker is optional, if you have
limited desktop space.
12
10