Calibrate The Scanner - Plustek SmartOffice PS286 Plus User Manual

Buttons on the scanner front panel will be used in this guide to demonstrate the
scanner operations. You may also use MacAction's on-screen Execute menu
to perform the same scanning tasks.
scanner offers you other ways to scan your paper documents or images.
Choose an appropriate scanning method that meets your scanning need
and preferences.
· By acquiring images from the scanner through our TWAIN interface within
any TWAIN-compliant application programs
For more information, please refer to "Chapter II. Scanning" of the Scanner
User's Guide.
1.2

Calibrate the scanner

Calibrate the scanner if colors appear in areas that should be white, or colors of
the scanned image and the original vary a lot. This allows you to adjust and
compensate for variations that can occur in the optical component over time by
its nature.
The following describes how to calibrate the scanner:
1. The Calibration Sheet, marked with an arrow on either edge at both sides, is
used specially for ADF Scanning calibration.
2. Insert the special calibration sheet into the ADF of the scanner, with an arrow
toward the scanner buttons.
3. Right-click the icon
All rights are reserved.
In addition to the two fast scanning methods described above, this
in the Dock, and then choose Calibration Wizard in
Introduction 3