Scanning From The On-Screen Docaction Ii Scan Profile Button; Scanning Via Twain Interface - Plustek SmartOffice PS286 Plus User Manual

Click the button within the DocAction II window for more information about the
settings.
Scanning from the On-screen DocAction II Scan Profile
Button
You can perform scanning task by double-clicking the scan profile button on the
screen. Follow the steps described below:
1. Place the document or images onto the scanner. (Refer to "Chapter II.
Scanning" of the Scanner User's Guide for more information in placing paper
into the ADF properly.)
2. Launch the DocAction II program.
3. Double-click the desired scan profile button.
4. The scanner starts to scan immediately and carry out the corresponding action
according to settings you have set up for the scan profile button.
Scanning via TWAIN
The TWAIN program is a very important piece of software that comes with your
scanner. This program acts as an interface between the scanner hardware and the
image-editing software you are using to view and edit images. The TWAIN program
allows you to adjust a number of settings to define the quality of the scanned image.
The following describes how you may use your TWAIN compatible program to scan
via the TWAIN interface. When you get familiar with the scanning, you may
alternatively use other TWAIN compatible scanning program or image-editing
application to do your scanning projects.
4
The availability of the TWAIN interface depends on the scanner model you purchase.
4
Interface
28