Scanner Utility - Plustek SmartOffice PS286 Plus User Manual

4 MacAction Help
the pop-up menu that opens.
4. Click on the Start button to begin the calibration process.
5. The scanner pulls the calibration sheet through the scanner, which completes
this scanner calibration. After the calibration is complete, click OK.
1.3

Scanner Utility

To save power consumption, the scanner will enter the standby mode after it is
idle for a while. You may disable the standby mode or define an idle time for the
scanner to automatically enter the standby mode.
1. Right-click the icon
the pop-up menu that opens.
2. In the Standby Mode section of the Scanner Utility window that opens,
click the button of your option:
in the Dock, and then choose Scanner Utility in
All rights are reserved.