Table of Contents
Advertisement
Fan Components
Verify that all of the following parts and hardware
have been received prior to beginning installation.
Contact your local representative or the manufacturer if
replacement parts are required.
FIRE ALARM LANDING POINT
Downtube and Mount Assembly (1)
GUY WIRE
U-Bolt Steel Cable
No. 4 GRIPPLE
CONNECTOR
®
Clamps (10)
TURNBUCKLE
Guy Wire
Clamps (4)
Motor/Hub Hardware Kit Bag # 915065
3/8 in. – 16 x 23/4 in. Grade 8, Hex Bolt (2)
M4 – 0.7 x 10 Machine Screw (4)
Airfoil Blade and Hub Plate Hardware Kit
5/16 in. Washer (12 OR 24)
5/16 in. – 18 Grade 8, Nylon Locknut (6 OR 12)
5/16 in. – 18 x 2 in. Grade 8, Hex Bolt (6 OR 12)
#10 – 12 x 3/4 in. Screw (6 OR 12)
GUY WIRE CLAMP BOLT
1/4 in. – 20 x 1 in. Machine Screw (4)
GUY WIRE CLAMP ASSEMBLY
®
POWER CABLE
LIGHT COMMUNICATION PLUG
(OPTIONAL)
LIGHT POWER PLUG
(OPTIONAL)
FACTORY INSTALLED VFD
Bag # 916290
20 Ft.
Guy Wire (4)
GUY WIRE CLAMP BOLT
Quick Link (8) Turnbuckle (4)
GUY WIRE CLAMP ASSEMBLY
QUICK LINK
GUY WIRE
Bag # 915066
GUY WIRE CLAMP BOLT
NOTE: Additional parts (provided by others) may be
required to complete the fan installation, including
additional wiring, steel angle or Unistrut
hardware for connecting the fan mount to the building
structure.
POWER CABLE
(PLUG OPTIONAL)
NOTE: Hardware quantities listed below indicate what
is required to complete installation. Hardware kits may
include extra fasteners as a convenience.
FIRE ALARM LANDING POINT
COMMUNICATION CABLE
WITH RJ45 SPLITTER
FACTORY INSTALLED VFD
Rear VFD Cover (1)
DS-M3
DS-M6
Motor/Hub Assembly (1)
Airfoil Blade (3 OR 6)
High Volume, Low Speed Ceiling Fans
®
channel, and
COMMUNICATION CABLE
WITH RJ45 SPLITTER
LIGHT POWER CABLE
(OPTIONAL)
SAFETY CABLE WITH
NO. 4 GRIPPLE
®
Hub Plate (1)
CAT-5e Control
Cable (1)
FRONT VFD COVER
MOTOR & HUB ASSEMBLY
Winglet (3 OR 6)
DOWNTUBE & MOU
LOGO
RE
DOWNTUBE SAFETY CABLE
5
Advertisement
Table of Contents
