Table of Contents
Advertisement
Fan Components
Verify that all of the following parts and hardware
have been received prior to beginning installation.
Contact your local representative or the manufacturer if
replacement parts are required.
LIGHT COMMUNICATION PLUG
(OPTIONAL)
LIGHT POWER PLUG
(OPTIONAL)
Downtube and Mount Assembly (1)
Bag # 916290
U-Bolt Steel Cable
Clamps (10)
Guy Wire
Clamps (4)
Quick Link (8) Turnbuckle (4)
Motor/Hub Hardware Kit Bag # 915065
3/8 in. – 16 x 2¾ in. Grade 8, Hex Bolt (2)
M4 – 0.7 x 10 Machine Screw (4)
Airfoil Blade and Hub Plate Hardware Kit
Bag # 915066 OR 854832
5/16 in. Washer (12 OR 24)
5/16 in. – 18 Grade 8, Nylon Locknut (6 OR 12)
5/16 in. – 18 x 2 in. Grade 8, Hex Bolt (6 OR 12)
#10 – 12 x 3/4 in. Screw (6 OR 12)
1/4 in. – 20 x 1 in. Machine Screw (4)
®
POWER CABLE
FIRE ALARM LANDING POINT
FACTORY INSTALLED VFD
20 Ft.
Guy Wire (4)
NOTE: Additional parts (provided by others) may be
required to complete the fan installation, including
additional wiring, steel angle or Unistrut
hardware for connecting the fan mount to the building
structure.
NOTE: Hardware quantities listed below indicate what
is required to complete installation. Hardware kits may
include extra fasteners as a convenience.
COMMUNICATION CABLE
WITH RJ45 SPLITTER
LIGHT POWER CABLE
(OPTIONAL)
Rear VFD Cover (1)
DS-3
DS-6
Motor/Hub Assembly (1)
Airfoil Blade (3 OR 6)
High Volume, Low Speed Ceiling Fans
®
channel, and
Hub Plate (1)
CAT-5e Control
Cable (1)
Winglet (3 OR 6)
5
Advertisement
Table of Contents
