COP-USA CC45WD Specifications

Wide Dynamic High Resolution Color Camera
ITEM NO.: CC45WD

Menu and Operation

Press the "menu" button, then press "enter" for menu control options
Under main menu mode, select "↑" or "↓".for sub-menu options.
Select "←" or "→" for submenu mode selection.
The blinking cursor will indicate that this category has been selected.
In the submenu, press "EXIT MENU" to return to the main menu.
＊
Quick Wide Dynamic Camera Setup
＊
1. Under the OSD (On Screen Display), Select Lens 。
＊
2. Adjust Brightness【50】 (00 to 100)
＊
3. Set Wide Dynamic Range (WDR)
＊
4. Set WDR LEVEL （LOW/MIDDLE/HIGH）
OSD
Manual
SPECIFICATION:
MODE NO.
TV SYSTEM
IMAGE SENSOR
CCD TOTAL PIXELS
SCANNING SYSTEM
SYNC SYSTEM
MINIMUM
ILLUMINATION
LENS
RESOLUTION
WHITE BALANCE
GAIN CONTROL
S / N RATIO
AUTO IRIS
OSD DISPLAY
WIDE DYNAMIC
VIDEO OUTPUT
GAMMA CORRECTION
OPERATION TEMPERATURE
OPERATIONAL HUMIDITY
POWER SUPPLY
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
CAM NAME OFF
LENS DC IRIS
EXPOSURE
DAY/NIGHT AUTO
WDR/BLC/ECLPS WDR
WHITE BAL ATW
3D-DNR ON
EFFECTS
SPECIAL
RET
EXIT
811(H) X 508(V)
525 lines, 60 fields/sec
Legacy mode
Star light Mode
ON SCREEN DISPLAY FOR ALL CONTROL
0.45 / 1.0 (SELECTABLE BY OSD MANUAL)
1 3
2 4
CC45WD
NTSC
COLOR 1/3-inch CCD Sensor
625 lines, 50 fields/sec
Internal / Line-Lock
0. 05 Lux ( F1.2 , 5600ºK )
0.0008 Lux ( F 1.2 , 5600ºK )
CS-mount
600 TVL
PUSH/MANUAL/ATW/COL-ROLL
SELECTABLE BY OSD MANUAL
52dB ( MIN) / 60dB ( TYP ) (AGC OFF)
A.E.S. / DC
52dB ( MAX) (Required DC-IRIS lens)
Composite output 1.0V p-p at 75 ohm
-20 º C TO 50 º C
within 85 % RH
Dual Power: AC 24V / DC12V
IRIS JACK DC-LENS
P1 DUMP-
P2 DUMP+
P3 DRIVE+
P4 DRIVE-
PAL
795(H) X 596(V)
350mA