Advertisement
Unable to Configure NetGuardian IPA
1
Connect the NetGuardian to a PC using a USB cable
Connect the NetGuardian's USB craft port to any computer with a terminal
emulator such as HyperTerminal. (All Windows-based PCs should have
HyperTerminal.)
Note: Make sure you're using a standard USB A-B cable. This is the same cable
commonly used for connecting a printer to a PC. If you don't have the proper USB
cable, you can order one directly from DPS Telecom.
2
Install the NetGuardian's USB Driver on your PC
You should see a "Found New Hardware" message.
Configuring Netguardian USB TKP.doc11/24/2010
Troubleshooting Checklist
Proprietary and Confidential
-2
Advertisement
Need help?
Do you have a question about the NetGuardian 480 and is the answer not in the manual?
Questions and answers