Table of Contents
Advertisement
Unable to Telnet to NetGuardian
□ Telnet to port 2002, not the default port 23.
◦ This can be specified in most Telnet clients, specifically in
▪ Windows Command Prompt:
(Click: Start → Programs → Accessories → Command Prompt OR Start → Run → type "cmd")
▪ Hyperterminal:
(Click: Start → Programs → Accessories → Communications → HyperTerminal)
In the Command Prompt window, type "Telnet", the NetGuardian's IP address, and "2002". Press Enter.
If the connection is successful, you will be prompted for a password (default password is "dpstelecom").
Create a new connection by entering the NetGuardian's IP address and port number 2002.
Troubleshooting Checklist
Windows Command Prompt
If the connection attempt fails, proceed to the next step:
HyperTerminal
12/14/15
2
Advertisement
Table of Contents
Need help?
Do you have a question about the NetGuardian and is the answer not in the manual?
Questions and answers