Setting The Clock; Setting The Timer - Philips MAGNAVOX FW 375P Owner's Manual

Timer Setting
1 Press TIMER SET.
— The TivER flag flashes,
2 Press PRESET A to select the desired source.
The display will switch as follows:
TUNER-CD-TUNER...
3 Press TIMER SET to confirm your source selection.
— The display will show "ON fS SD and
" /«?-'"£? am" flashes.
4 Press TUNING l«or^^I to set tlie hour for the
timer to start
5 Press PRESETTor A to set the minutes for the
timer to start.
6 Press TIMER SET to store the start time.
— The TIMER is now set
— The TivER flag remains lit
Setting the clock
The clock uses the 12 hour system, e.g. 1 PM or 12 AM.
1 Press CLOCK.
— " !5'DG
am"
starts flashing.
2 Set the hour with TUNING \« or .
3 Set the minute with PRESET Tor A.
4 Press CLOCK again to store the setting.
— The clock starts running.
Note:
When a power interruption occurs, the clock settings are
erased.
Setting the Timer
• The system can switch on to TUNER or CD mode
automatically at a preset time. It can serve as an alarm
to wake you up. After half an hour from the preset time,
the system will return to the standby mode.
• Before setting the timer, make sure the clock is set
correctly.
• The timer works only once for each setting.
• The volume ofthetimerwill be at the last setting
before the set is switched to standby mode.
To stop the TIMER
• PressTIMER ON-OFF on the set,
— The TIMER is now off.
To start the TIMER again
• Press TIMER ON-OFF on the set.
— The display will show the last set start time of the
TIMER and its flag,
— The TIMER flag remains lit
Notes:
- If the source selected is TUNER, the last tuned
frequency will be switched on.
- If the source selected is CD, the first track of the fast-
selected disc will be played If the CD trays are
the TUNER source will be selected instead
24