Select Stereo/Mono Broadcast; Other Features; Set The Alarm Timer - Philips BTM2060W User Manual

Select stereo/mono broadcast

Note
•
Stereo broadcast is the default setting for tuner mode.
•
For stations with weak signals: to improve the reception,
change to monaural sound.
In FM tuner mode, press
mono and stereo broadcast.
to switch between

6 Other features

Set the alarm timer

This system can be used as an alarm timer.
You can select CD, FM tuner, or USB as alarm
source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold TIMER
until [SET TIMER] (set timer) scrolls on the
display.
» [SELECT SOURCE] (select source) is
displayed.
2
Press SOURCE repeatedly or the source
selection buttons on the remote control to
select a source: disc, FM tuner, or USB.
3
Press TIMER to confirm.
» The hour digits blink.
4
Press or
5
Press TIMER to confirm.
» The minute digits blink.
6
Repeat steps 4-5 to set the minute and
alarm volume.
Tip
•
If the system is idle for 90 seconds, it exits alarm setting
mode automatically.
To activate or deactivate the alarm timer:
In standby mode, press TIMER repeatedly to
activate or deactivate the alarm.
appears when the alarm timer is
»
activated.
to set the hour.
EN 14