Tuner Operations; Tuning To Radio Stations; Presetting Radio Stations; Automatic Preset Programming - Philips FWD186 User Manual

IMPORTANT!
– Make sure FM and MW antennas are
connected.

Tuning to radio stations

1
Press TUNER to select "FM XX" or "MW XX".
2
Press and hold 1 / ¡ on the system or on
the remote control until the frequency indication
starts to change, then release.
➜
The next radio station will be tuned
automatically.
➜
i
lights up for FM stereo reception.
3
To tune a weak station, press 1 / ¡ on the
system or on the remote control to search until
a radio station with sufficient signal strength is
found.

Presetting radio stations

You can store up to 40 preset radio stations in
the memory, starting from FM and followed by
MW bands.

Automatic preset programming

You can start automatic presetting from a
selected preset number.
1
Press TUNER (BAND) to select TUNER mode.
➜ The current radio frequency will appear on
the display.
To begin automatic preset from a desired
preset number
●
Press O / P or numeric keys (0-9) to
select the desired preset number.

Tuner Operations

2
Press and hold PROGRAM until "AUTO
PROG" appears on the display.
➜
PROG will start to flash.
➜
The system will start to search all radio
stations on the FM band, then MW band.
➜
All radio stations with strong signal strength
will be stor ed automatically.
➜
The system will stop searching when all
available radio stations are stored or when the
memory of 40 preset radio stations is full.
➜
The first preset radio station will then be
played when completed.
To stop storing the automatic preset
● Press 7 to stop storing the automatic preset.
Note:
– If no preset number is selected, automatic
preset will begin from "01" and all your former
presets will be overridden.
35