Table of Contents
Advertisement
All manuals and user guides at all-guides.com
CD
Shuffle
(only on remote control)
In shuffle mode, the system plays all the
available discs and their tracks in random
order. Shuffle may be used also when
tracks are programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE.
™ "SHUFFLE" will be displayed.
™ The SHUF flag, the disc and the track
selected at random appear on the
display.
• The discs and the tracks will be played
in random order until you pressÇ.
• If you press REPEAT during shuffling,
the current track or all available discs
will be played repeatedly.
™ "TRACK" or "ALL DISC" will be
displayed.
™ The REP and SHUF flags appear on
the display.
2 Press SHUFFLE again to resume normal
playback.
™ The SHUF flag disappears from the
display.
Note:
– REPEAT DISC mode will be cancelled
when shuffle is selected.
14
pg 01-22/C10/22-Eng
14
TUNER
Repeat
(only on remote control)
You can play the current track, a disc or all
available discs repeatedly.
STANDBY-ON
1 Press REPEAT on the remote control to
select the various repeat modes.
™ "TRACK", "DISC", "ALL DISC"
or "OFF" will be displayed.
™ The REP flag appears on the display.
• The selected track, selected disc or all
available discs will now be played
repeatedly until you pressÇ.
2 Press REPEAT until the "OFF" mode is
displayed to resume normal playback.
™ The REP flag disappears from the
Note:
display.
– For 'EASY SET' feature, please refer to
Notes:
page 10.
– REPEAT DISC mode is not available
during program play or shuffle mode.
Tuning to radio stations
– You can also repeat shuffling a program.
1 Press TUNER (BAND) to select TUNER
™ "TRACK" or "PROGRAM " will be
mode.
displayed.
™ "TUNER" will be displayed.
™ The REP, PROG, and SHUF flags
appear on the display.
2 Press TUNER (BAND) again to select
the desired waveband : FM, MW or LW.
3 Press à or á for more than one
second, then release.
™ The display will show "SEARCH"
FW-
C10
MINI HIFI SYSTEM
CD1 • 2 • 3
BAND
TAPE 1 • 2
CD
TUNER
TAPE
TUNING
PRESET
SEARCH
STOP• CLEAR
PLAY• PAUSE PREV
DIGITAL
DSC
SOUND
CONTROL
PROGRAM
CLOCK•TIMER
DIM
DIGITAL SOUND CONTROL
• Repeat this procedure until the desired
station is reached.
• To tune to a weak station, briefly press
à or á repeatedly until the display
shows the desired frequency and/or
when the best reception has been
obtained.
Storing Preset Stations
A few seconds later, the current radio
frequency will be displayed.
You can store up to 40 radio stations in the
memory. When a preset radio station is
selected, the preset number appears next
to the frequency on the display.
Automatic programming
1 Press TUNER (BAND).
until a radio station with sufficient
2 Press PROGRAM for more than one
signal strength is found.
second.
™ The PROG flag starts flashing and
"AUTO" will be displayed.
3/7/00, 5:05 PM
VIDEO
MASTER
VOLUME
AUX
NEXT
3139 116 19311
Advertisement
Table of Contents
