Crock-Pot Express 6Qt Oval Max Owner's Manual page 22

NOTIFICATION CODES
Notification
"LOCK LID" blinking Ensure that the Lid is closed completely and in the lid
light handle is in the LOCKED
Display "E1" The Cooker will stop the cooking cycle. Unplug Cooker
and contact customer service center at 1-800-323-9519.
Display "E2" The Cooker will stop the cooking cycle. Unplug Cooker
and contact customer service center at 1-800-323-9519.
Display "E3" If you receive this code while using one of the pressure
cooking settings, then the Lid probably did not close or
seal correctly. To resolve, follow the steps below:
1. Rotate the Steam Release Dial to the "Release"
position and wait for the unit to de-pressurize.
2. Take off the Lid and look underneath to make sure the
Sealing Gasket (large rubber ring) is properly secured to
the underside of the Lid.
3. If your recipe looks like it may need more liquid
now that you have released some of the steam after
removing the Lid, then add more, stir your ingredients,
and reattach the Lid, making sure the Steam Release
Dial is in the "Seal"
4. Unplug the unit for at least 5 seconds, and then re-
plug it in and re-program your cook settings to begin
cooking.
-E42-
Solution
position, aligning with .
position.
NOTIFICATION CODES (CONT.)
Notification
Display "E5" This code appears when either the Lid or Steam Release
Dial is being used incorrectly for a non-pressure cook
setting. Please note that the Lid should never be used
when using the BROWN/SAUTÉ, SIMMER or BOIL
settings. When using the Lid during the SLOW COOK or
YOGURT settings, the Steam Release Dial must be turned
to the open or "Release"
Notification during any of these situations, then simply
remove the Lid while using Brown/SAUTÉ, Sauté, Boil,
and SIMMER, or correctly position Steam Release Dial to
while using SLOW COOK or YOGURT, and
"Release"
then unplug the unit for at least 5 seconds, re-plug it in
and re-program your cook settings to begin cooking.
Display "E6" If you receive this code while cooking, it means that
the Crockpot TM
generate enough steam to pressurize completely. To
resolve, follow the steps below:
1. Make sure that the Steam Release Dial is turned to the
closed or "Seal"
position, then rotate it to the correct position and jump
to step 3 below.
2. If the Steam Release Dial was in the correct position,
then turn it to the "Release"
the unit to de-pressurize. Then remove the Lid and look
underneath it to make sure the Sealing Gasket (large
rubber ring) is properly secured to the underside of the
Lid.
3. Add another cup of liquid (water, broth, etc) to the
cooking pot, stir your ingredients, and reattach the Lid,
making sure the Steam Release Dial is in the "Seal"
position.
4. Unplug the unit for at least 5 seconds, and then re-
plug it in and re-program your cook settings to begin
cooking.
-E43-
Solution
position. If you receive the E5
Express Pressure Cooker was unable to
position. If it was not in the correct
position and wait for