IBM IntelliStation Z Pro Type 6221 Hardware Maintenance Manual page 20

following illustration.
Notes:
1. You can press F1 to display Help information for a selected menu item.
2. The choices on some menus might differ slightly, depending on the BIOS
The following choices are available from the main menu:
v System Summary
v System Information
v Devices and I/O Ports
10
IBM IntelliStation Z Pro Type 6221: Hardware Maintenance Manual
IBM Setup - (c) Copyright IBM Corporation 2002
Configuration/Setup Utility
·
System Summary
·
System Information
·
Devices and I/O Ports
·
Date and Time
·
System Security
·
Start Options
·
Advanced Setup
· PC Health Status
·
Error Logs
Save Settings
Restore Settings
Load Default Settings
·
Exit Setup
<F1> Help
<Esc> Exit
version in your computer.
This choice contains general information about your computer, such as a
summary of components and computer configuration. You can view information
about the type and speed of the microprocessor and the amount of memory that
is installed. System summary information appears on both the full and limited
Configuration/Setup Utility menus.
Changes that you make to configuration settings appear on this summary screen.
You cannot edit the fields of the configuration and system information.
Select this choice to display information about your computer. Changes that you
make on other menus might appear on this summary screen. You cannot edit
any fields. The System Information choice appears only on the full
Configuration/Setup Utility main menu.
– Product Data
Select this choice to view system information, such as the machine type and
model, the computer serial number, and the revision level or issue date of the
BIOS and diagnostics code stored in the electrically erasable programmable
ROM (EEPROM).
– System Card Data
Select this choice to view information about the system board.
Select this choice to view or change the assignments for devices and
input/output (I/O) ports. This choice appears only on the full Configuration/Setup
Utility main menu.
You can use this choice also to enable or disable the integrated SCSI controller
with RAID capabilities and Ethernet (LAN) controllers, and standard ports (serial,
parallel, and so on).
< > < > Move
<Enter> Select