Genius TRIGON 02 Manual For The Installer page 7

1. DESCRIPTION AND TECHNICAL SPECIFICATIONS
2. ELECTRICAL EQUIPMENT (standards system)
3. INSTALLATION OF AUTOMATION
3.1. PRELIMINARY CHECKS
3.2. INSTALLATION DIMENSIONS
3.3. INSTALLATION STEPS
3.4. TEST OF THE AUTOMATION
4. MANUAL OPERATING MODE
5. RESTORING NORMAL OPERATING MODE
6. MAINTENANCE
7. REPAIRS
APPLICATION WITH TELESCOPIC ARM FOR FOLDING DOORS
1. DESCRIPTION
2. TRIGON K INSTALLATION PROCEDURE
Manufacturer: GENIUS S.p.A.
Address: Via Padre Elzi, 32 - 24050 - Grassobbio- Bergamo - ITALY
Declares that: Operator mod. TRIGON 02 / TRIGON 02 24 / TRIGON K / TROGON K 24 with 230 Vac power supply
• is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of
Directive 2006/42/EEC;
• conforms to the essential safety requirements of the following EEC directives:
• 2006/95/EC Low Voltage directive.
• 2004/108/EC Electromagnetic Compatibility directive.
• and also declares that it is prohibited to put into service the machinery until the machine in which it will be integrated or of which
it will become a component has been identified and declared as conforming to the conditions of Directive 2006/42/EEC and sub-
sequent modifications.
Grassobbio, December 30, 2009
Read this installation manual to the full before you begin installing the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol
CE DECLARATION OF CONFORMITY
Notes on reading the instruction
draws your attention to the notes on the characteristics and operation of the product.
TRIGON 02 - TRIGON K
INDEX
Managing Director
D. Gianantoni
Page 
Guide for the installer
page.6
page.6
page.6
page.6
page.6
page.7
page.7
page.7
page.7
page.7
page.7
page.8
page.8
page.8