Required Tools And Materials; Decommissioning And Disposal; Cabling Recommendations - Siemens SIMATIC NET RUGGEDCOM RS900L Installation Manual

Introduction
1.3 Required Tools and Materials
Power Supply Terminal Blocks
1.3

Required Tools and Materials

The following tools and materials are required to install the RUGGEDCOM RS900L:
AC power cord (16 AWG)
Multi-mode and/or single-mode fiber optic cables
CAT-5 Ethernet cables
Flathead screwdriver
Phillips screwdriver
4 x #6-32 screws
1.4

Decommissioning and Disposal

Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
Decommissioning
This device may include sensitive, proprietary data. Before taking the device out of
service, either permanently or for maintenance by a third-party, make sure it has
been fully decommissioned.
For more information, refer to the associated Configuration Manual.
Recycling and Disposal
For environmentally friendly recycling and disposal of this device and related
accessories, contact a facility certified to dispose of waste electrical and electronic
equipment. Recycling and disposal must be done in accordance with local
regulations.
1.5

Cabling Recommendations

All copper Ethernet ports on RUGGEDCOM products include transient suppression
circuitry to protect against damage from electrical transients and conform with
IEC 61850-3 and IEEE 1613 Class I standards. This means that during a transient
electrical event, communications errors or interruptions may occur, but recovery is
automatic.
4
Pluggable terminal blocks for connecting one or more power
sources. For more information, refer to
13)" and
Tools/Materials
"Power Supply Specifications (Page
For connecting power to the device.
For connecting the device to a LAN.
For connecting the device to a LAN.
For mounting the device to a DIN rail.
For mounting the device to a panel.
For mounting the device to a panel.
Installation Manual, 04/2021, C79000-G8976-1027-09
"Connecting Power (Page
29)".
Purpose
RUGGEDCOM RS900L