Honeywell datamax-o'neil M-Class Mark II Manual page 10

UHF Option:
G) Secure the UHF Module (Item 10) to the Mounting Plate using the four Standoffs
(Item 11) and four Screws (Item 8).
H) Route the Antenna
Cable behind the
Mounting Plate and
then connect the cables
according to the table
below:
Cable
Antenna Cable
Power Cable (Item 4)
Comm Cable (Item 5)
I/O Cable (Item 9)
Main Logic
CCA
J12
Power
Supply CCA
Antenna
Cable
From
Antenna
J7 – Power Supply CCA
J12 – Main Logic CCA
J2 – UHF Module
8
Screws
Mounting
Plate
UHF
Module
Standoffs
J2
J1
J3
J7
J2
J1
Mounting
Antenna
Port
Antenna Port J1 – UHF
Module
J1 - Regulator CCA
J2 – Regulator CCA
J3 – Regulator CCA
Regulator
CCA
UHF
Module
Plate
To