Frama Fn 5 Series Quick Start Manual

Fn Series 5
Quick Installation Guide
Machine components:
Feed Table with
Sealing Unit
1
Unpack all components from the box, remove packaging
and any transit tape.
5
Lift machine slightly on the left hand side and align the hooks to attach the Feed Table
align the catch tray to the right hand side of the machine
9
Installation Process
Welcome to your mailing system. Press "OK"
to start the installation.
OK
Press OK to start the installation.
For more help with your installation, please visit:
Machine Base
Catch Tray
2
Lift the cover of the machine to reveal the Ink
Cartridge (h) and Meter (i) locations.
6
(b) –
Lower Weighing Platform release panel at rear of the
(c).
machine. Place Weighing Platform
machine and slide forward to lock. Lift panel to secure
and clip cable into place.
10
Installation Process
1 LAN
OK
Follow the step by step instructions.
Weighing Platform
3
Open the cover. Place the Meter (i) into the meter compartment and push
backwards until it slots into position. Close the cover.
7
Connect the Weighing Platform
(d) on top of the rear of the machine. Then connect the LAN Cable
to either side of the machine.
11
Your machine is now ready
to use. Please turn over
for your Quick User Guide.
www.frama.co.uk/Fn5
LAN Cable Power Cable
4
Insert the Ink Cartridge (h) into the machine with the 'TOP' and 'LOCK' stickers facing
upwards. Push the Ink Cartridge (h)
the machine until you hear a 'click' - close the cover of the machine.
8
(e) connector into the COM PORT on the Turn on the machine using the switch behind the
Power Cable
(f) and Power Cable (g)
Ink Cartridge
Postage Meter
(PSD)
Remove tabs from
print heads before
inserting into unit!
towards the back of
(g) and follow the steps on screen.