Connection And Operation - Techly IDATA HDMI-VGA2A User Manual

EN
EN
HDMI/VGA CONVERTER
WITH AUDIO

5.0 CONNECTION AND OPERATION

Before installation, please make sure all the devices you wish to connect have been turned off.
1) Connect the HDMI input of this product to HDMI source.
2) Connect the VGA output of this product to display with VGA input.
3) Connect the Headset or stereo video amplifier to the Headset jack.
Note: HDMI to VGA conversion may existing the following compatibility problems
1. If the VGA port of Display doesn't support Refresh Rate at 50HZ, the connected Display will
have no image when the HDMI Source setting at 50 Hz.
2. If the VGA port of Display doesn't support resolution at 720p, 1080i and 1080p, the connected
Display will have no image when the HDMI Source setting at 720p, 1080i and 1080p.
3. If the VGA Display connected doesn't support interlaced resolution, it will have no image
when the HDMI Source setting at 1080i, 480i or 567i.
Our converter fully supports the above formats. These common problems are mainly caused by
Displays not supporting these formats.
5.1 CONNECTION DIAGRAM
HOME AMPLIFIER
DISPLAY
HDMI A TYPE TO VGA ADAPTER
WITH AUDIO CONNECTION
HEADSET HDMI SOURCES
WWW.TECHLY.COM
EN - 5