Panel Descriptions; Connection And Operation - Techly IDATA SPDIF-3 User Manual

EN

4.0 PANEL DESCRIPTIONS

Please study the panel drawings below and become familiar with the signal input(s), output(s)
and power requirements.
BACK PANEL

5.0 CONNECTION AND OPERATION

Before installation, please make sure all devices you wish to connect have been turned off.
1) Connect the audio source device to the Converter using appropriate Toslink or Coaxial
cables.
2) Connect the A/V Receivers or Amplifiers to the Converter using appropriate R/L cable.
3) Insert the DC side of 5v power supply into the converter and then connect the AC side of
the power supply into the wall outlet.
Note: When connected to the Toslink and Coaxial cables at the same time, the product will
give priority to Toslink input.
Attention: Insert / Extract cable gently.
10
DIGITAL TO ANALOG AUDIO CONVERTER
UPPER PANEL
Digital to Analog
Audio Converter
FRONT PANEL