Warranty; Declaration Of Conformity; Declaration Of Incorporation16 - Tecumseh SILENSYS SILAJ2432P Original Installation Instructions

Installation Instructions
A permanent control is necessary. In case of fan
failure, the unit automatically stop.
While maintenance and commissioning check that the
compressor compartment panel fan is working, otherwise
flammable refrigerant presence is possible in the unit.
This fan has been sized to ensure an efficient air renewal in the
compressor compartment. It is essential to replace it by the
original model.
Connections are available to provide an alarm. Refer to scheme
in appendix 7.

7. WARRANTY

For information concerning the condensing unit warranty,
please refer to our general terms and conditions of sale

8. DECLARATION OF CONFORMITY

Silensys® Advanced condensing units comply with the Low
Voltage Directive 2014/35/UE.
Silensys® Advanced condensing units are evaluated, designed,
constructed and documented as a sub-assembly compatible
with the recommendations of the Pressure Equipment Directive
2014/68/EU and can be incorporated in an assembly.
9. DECLARATION OF INCORPORATION
Only qualified staff are authorized to work on the condensing
unit. This product is defined as for installation in machines
according to European Directive 2006/42/CE.
It is not permitted to run the condensing unit before the
machine into which it is incorporated has been declared in
conformance with the pertaining legislation. The condensing
unit itself is therefore not required to comply with Directive
2006/42/CE.
In its constant endeavor to improve its products, TECUMSEH
EUROPE SALES AND LOGISTICS S.A.S.
S.A. reserves the right to change any information in this
instruction manual without prior notification.
Silensys® Advanced and L'Unite Hermétique® are registered
trademarks of TECUMSEH EUROPE S.A.S.
1