Page 1
Fan replacement Verifications Drier Compressor replacement 6 WARRANTY 7 DECLARATION OF CONFORMITY 8 DECLARATION OF INCORPORATION These instructions concern Silensys condensing units as described in chapter 2. ® Read carefully the following instructions before installing the unit. 366325c / 08.03 2/44...
Page 2
(Refer to annexe 2, page 27) 2.5 Circuit diagrams (Refer to annexe 7, pages 34 to 39) 3 INSTALLATION (see annexe 4 page 31, to remove the Silensys ® access panel) 3.1 Unpacking • Wall mounting (see annexe 4, page 31): Make sure that the unit is in good condition and has not been damaged externally.
Page 3
4.2 Evacuation ADVICE Evacuate the installation to about 200 micron metres Hg, to To maintain the quality of a TECUMSEH EUROPE S.A. unit and to ensure a good quality vacuum. ensure its smooth operation, it is recommended to: It is recommended to evacuate simultaneously on both sides...
Page 4
6 WARRANTY can be accessed by removing the fan plate. Refer to your terms and conditions of sale. 7 DECLARATION OF CONFORMITY • We hereby declare, that the Silensys ® condensing units comply with the low voltage directive 93/68/EC. • Harmonised norms applied: - CEI 335-1 [EN 60 335-1]: Safety of electrical domestic and analogue appliances - general descriptions.
Need help?
Do you have a question about the SILENSYS and is the answer not in the manual?
Questions and answers