inbody 720 User Manual page 39

7. How to Operate the Equipment
This procedure begins with the home screen, which is the initial environment settings of the InBody720, when it is
factory-released. The InBody720 goes back to the home screen, as the examinee steps down from the stand.
(1) See if the InBody720 is in test-ready status. The windows that are in test-ready status should look like as shown below.
(2) The less clothes or devices you wear during the test, the more accurate the test results will be. To get as close to the
actual weight as possible, take off all accessories before testing.
(3) Both heel and the ball of your feet should touch the foot electrode. Step on the stand barefoot. Once you are on, the
LCD monitor will display your weight. Put your hands down naturally and stand still comfortably, until the fluctuation in
the weight goes down to zero and the value for weight is stabilized.
(4) When the value for weight is stabilized, InBody720 displays the weight. The weight is
recorded to the weight field in the personal information windows, as the information
windows switch to the personal information windows, prompting the user to enter
personal information.
26