Table of Contents
Advertisement
② Install USB driver program for the configuration USB cable
1. Run 'CP210x_Prolific_DriverInstaller' to install the driver for the USB data cable.
Note: CP210x_Prolific_DriverInstaller is in the folder 'USB-232 Driver' in the CD. Connect the
USB Data Cable between MT08 and PC.
2. Connect the configuration cable with PC, open device management of your computer,
you can find "Prolific USB-to-Serial Comm. Port " ,as following picture shows.
The USB port is virtual comm. Port (com3) in this example,
3. Open the GPS Tracker Parameter Editor
① Connect MT08 with PC by the configuration cable
② Confirm MT08is in the Power Off states
③ Double click GPS Tracker Parameter Editor.exe and Select the COM Port, following picture
shows:
User Manual of MT08
- 7 -
Advertisement
Table of Contents
