How To Operate; Arm/Disarm By Phone Calling; Arm/Disarm The System Via Sms - Yumpu MT08 User Manual

8. How to operate it:
Note:
①The default password is 000000, you should change the password when use the device.
Change user's password: W000000,001,******
(000000 is old password; ******is new password)
② Command Letter must be capital letters.
8.1 Arm / Disarm by phone calling
User could also use the alarm-received mobile phone to call the tracker's SIM card number,
so as to Arm/Disarm the system.
Arm: After hearing several ring tones, if the system hangs up the call automatically, and call
back you, it means that the system is armed.
Disarm: After hearing several ting tones, if the system hangs up the call automatically, and
don't call back you, it means that the system is disarmed.
Note:
(1) There is no communication fee for this operation, it is a very convenient way to arm &
disarm the system.
(2) The SIM card inside the device must have the function of caller ID display.
(3) Only the Alarm-received mobile phone can realize this function.
8.2 Arm / Disarm the system by SMS
SMS command: 000000ARM
This SMS instruction is used to arm the system;
When the system is armed, the movement alert is activated automatically. When the
motorcycle / car moves, the alarm will be triggered.
SMS command: 000000DSM
User Manual of MT08
- 20 -