Appendix 1 Configure By Computer - Yumpu MT08 User Manual

MT08 is in an inner place

Appendix 1 Configure by computer

Item
SMS tracking No.
Password
Over Speed
Prefix(area code)
Time Zone
Wiretapping
Distance
Power Saving
Course
SOS Button/IN1
Button B/IN2
Button C/IN3
User Manual of MT08
Description
Interval To put a mobile phone number for automatic tracking
by SMS at certain time interval in minutes
To set SMS command password, the default is
000000,
To set speed limit for over speed alarm
To set country code
To set time zone, GMT*60 (minutes), if in west half
western hemisphere, "-" is necessary to put ahead
To set wiretapping mobile phone number
To set track and upload data by certain distance in
meters
To set time enter into standby mode when shaking
not detected to save power and GPRS data traffic
To set upload data via angle shifting by certain angles
To customize the reply SMS text when SOS Button/Input1 triggered
To customize the reply SMS text when Button B/Input 2 triggered
To customize the reply SMS text when Button C/Input 3 triggered
- 24 -
Wait for the target to come out