Authorize The Alarm-Received Mobile; Change User Password; Check The Real Physical Address - Yumpu MT08 User Manual

This command is used to disarm the system & stop sending alert SMS.
8.3 Check the location by Google map's URL
SMS command: 000000MAP
Upon receiving the SMS command, the tracker will automatically send back the SMS
including the Google map's URL, user an use smart phone (GPRS data service is enabled) to open
the URL, the car's location will be showed on the Google map.

8.4 Authorize the alarm-received mobile

SMS command: W******,003,F,P,<Mobile number>
******is the user password, default one is 000000.
(F=0, to turn off this function; F=1,to send alert SMS)
(P=1, the first phone; P=2, the second phone; P=3, the third phone)
In case of alert, the alarm SMS will be sent to this preset mobile number automatically.
Example: W000000,003,1,1,13800138000 to the tracker's SIM card number, if there is any
alert, system will send alert SMS to the first mobile 13800138000

8.5 Change user password

SMS command: W<000000>,001,######
<000000>is old password,###### is new password, default one is 000000
The length of the user's password is 6 digits. Users are suggested to change to the new
password in use.
Example: W000000,001,123456

8.6 Check the real physical address

SMS command: 000000ADD
When user sends this SMS command to the tracker, the tracker will automatically send back
the car's real physical address ( such as city name, street name) to your mobile by SMS.
There is no need for the user to setup any server, but it needs supports from our GPRS01
server.
Remark:
(1) The GPRS data service of the tracker's SIM card must be activated, and the correct
GPRS setting is needed (refer to the chapter of the setting of GPRS connection), user can
User Manual of MT08
- 21 -