Table of Contents
Advertisement
When
the
MT08
moves out
of preset scope, it will
send
one Geo-fence SMS
to the
SOS preset number.
Extend Settings
Set Geo-fence alarm
017 command is for
alarm when tracker
moves out the preset
scope;
117 command is for
alarm when tracker
moves in.
When
the
tracker
moves in or out, it
will send an SMS
alarm
to
the
authorized
phone
number for SOS.
Presetting by SMS for GPRS tracking
Set ID for MT08 by SMS
Set APN by SMS
User Manual of MT08
W******,008,ABCDEF
GHIJ###
W******,017,data
W******,117,data
W******,010,ID
W******,011,APN,APN
- 26 -
=00, disable
=01, 30m
=02, 50m
=03, 100m
=04, 200m
=05, 300m
=06, 500m
=07, 1000m
=08, 2000m
A=0, disable position report function
when a call is made to MT08
A=1, enable position report function to
get position SMS by Calling MT08
I=0, disable power failure alert
I=1, enable power failure alert
The
functions
of
remained for furthur use.
### is the ending character.
data is the coordinates which include:
Lower-left
X,
Lower-left
X,Upper-right Y
For
11404.0000,E,2232.0010,N,11505.1234,E,23
33.5678,N
Note:
1. Lower-left X,Y (longitude and latitude)
should be smaller than Upper-right X,Y;
2. All longitudes and latitudes should be in
ASCII format as follows:-
Longitude: DDDMM.MMMM,E/W. 4 places
of decimal. '0' is needed to be stuffed if no
value available.
Latitude: DDMM.MMMM,N/S. 4 places of
decimal. '0' is needed to be stuffed if no
value available;
3. Send W******,017 or W******,117
without data to disable this function.
Tracker ID must be less than
14 digits
APN Name, APN Password If
BCDEFGHJ
are
Y,Upper-right
example,
Advertisement
Table of Contents
