Setting The System - Mercury MercMonitor Manual

Setting the System

The "System" menu displays information about the engine, its
location, the location of the station, the software version and the
level of the gauge. This information cannot be edited.
The gauge can also be reset to the factory default settings.
Resetting to factory default will erase all customized menu
options. Additionally, the name of the gauge can be edited with
up to 14 characters. When the gauge is not connected to an
engine, the gauge can be set to "Simulator." This can be used
for a visualization simulation of how the gauge screens will
appear when installed in a vessel.
1. While in the "Main Menu," press the "–" or "+" button to
highlight the "Settings" menu.
2. Press the "MODE" button to enter the "Settings" menu.
3. Press the "–" button to highlight the "System" menu.
SETTINGS
Main Menu
Propulsion / ST
Vessel
Favorites
Alarms
!
Settings
MODE
62
33077
eng