Economy (Eco) Settings - Mercury MercMonitor Manual

7. Press the "MODE" button to change the filter to "OFF,"
"LOW," "MEDIUM," or "HIGH."
8. Press the "–" button to highlight the "Exit" option and press
"MODE" to exit the "SmartTow" menu.

Economy (ECO) Settings

The software for the ECO screen monitors the engine sensors
and looks for the best fuel economy while the vessel is in
operation. When the software recognizes an improvement in the
fuel economy, the gauge records what the trim and engine RPM
values are at that time. This calculation happens whether the
ECO screen is visible or not. When the software has recorded
the RPM and trim values, it will guide the operator with arrows, to
where that optimum running speed and trim setting was. In most
applications the ECO screen does not need any calibration,
although there are settings to customize the gauge for your
boating style. The default settings are within acceptable
parameters for most vessel applications.
IMPORTANT: A manual trim calibration must be performed
before the ECO screen can be used. Using a default trim
calibration will not allow the ECO screen to function properly.
The menu path is: "MAIN," > "Settings," > "Trim," > "Calibration."
1. While in the "Main Menu," press the "–" or "+" button to
highlight the "Settings" menu.
SETTINGS
SmartTow
Speed Input
Paddle
Speed Filter
OFF
Exit
[DOWN] [EDIT]
[ UP ]
MODE
58
35854
eng