Maintenance Screen - Mercury MercMonitor Manual

Maintenance Screen

Some 4‑Stroke power package models can estimate the amount
of time the engine has run since the last scheduled maintenance.
Normal scheduled maintenance for the engine is every 100
hours. The maintenance screen shows a bar graph
approximating the amount of time remaining before a scheduled
maintenance is required. When the maintenance screen is reset,
the bar graph will change to 100 hours before the next scheduled
maintenance. The maintenance screen must be turned on for
this screen to be displayed. Your owner's manual maintenance
schedule should be followed regardless of what the gauge
displays. To turn this feature on, refer to Section 2: Settings—
Turning the Screens On.
1. While in the "Main Menu," use the "–" or "+" button to
highlight the "Full Screens" option. Press "MODE" to open
the "Full Screens" option.
2. Press the "MODE" button to page through the screens.
3. The "Maintenance" screen will show a bar graph
approximating the amount of time remaining before a
scheduled maintenance is required. Press the "MODE" to
exit to the "Maintenance" screen.
FULL SCREENS
Maintenance
OK
Scheduled Maintenance
GEN. MAINTENANCE
[ EXIT ]
MODE
132
OK
50376
eng