Engine Scheduled Maintenance; System Scan - Scan Report - Mercury VesselView 7 Manual

Section 2 - System Startup

Engine Scheduled Maintenance

If a maintenance reminder is detected during a system scan, the contextual data area will display descriptive text in a bold color
screen. The system tray lower left corner will change according to the fault that is displayed. Use common sense to protect your
investment, and check your engine oil on a regular basis, preferably before each use.
1. When the scheduled maintenance time is fully depleted, the contextual data area will display a general maintenance
reminder to perform the scheduled maintenance.
2. Open the + icon to expand the text. You can reset the maintenance to 100% or exit the screen.
NOTE: The wrench icon maintenance reminder will be displayed in the system tray until the fault is cleared from the
system
3. After resetting the maintenance reminder, the wrench icon no longer appears in the system tray.
System Scan ‑ Scan Report
When a system scan is completed and there are no faults, maintenance reminders, or communication errors, the contextual
data area will display SCAN COMPLETE with a report and a good‑stewardship message. The scan report will be displayed
until the engine is put into gear or the X button is pressed.
• The good stewardship messages are randomly selected. Examples include: Do you have floatation devices, Mercury
reminds you to please boat safely.
Page 18
52447
52448
52449
90-8M0074777 MAY 2013
eng