Advertisement
USER'S GUIDE
6–2
Follow these steps to check the toner cartridge:
1. Remove the toner cartridge from the printer.
If you turn on the printer without a toner cartridge installed, the display
shows the following operator call message to prompt you to install the
toner cartridge.
14 NO CARTRIDGE
2. Rock the toner cartridge gently several times at a 45° angle to distribute
the toner evenly inside the cartridge.
3. Install the toner cartridge again.
4. Try printing and check the printed page.
If you are not satisfied with it or the display still shows the toner empty
message, replace the old toner cartridge with a new one.
Replacing the Toner Cartridge
Every time you replace the toner cartridge, you need to clean the inside of
the printer. For further information on cleaning, see "Cleaning" in this
chapter.
Note
To ensure optimum print quality, be sure to use quality toner cartridges. To
obtain toner cartridges, consult the dealer where you purchased the printer.
Before you begin the following steps, refer to
Cartridge" in Chapter
2. Be sure to review the instructive diagrams.
To replace the toner cartridge, follow these steps:
1. Turn off the printer.
2 Open the top cover of the printer.
3. Lift the top of the toner cartridge slightly and pull it out of the printer.
"Installing the Toner
Advertisement
Chapters
Troubleshooting
