Mode Switch Settings In Hp Laserjet 4+, Epson Fx-850, And Ibm Proprinter Xl Modes - Brother HL-1260 Service Manual

USER'S GUIDE
Mode Menu
INTERFACE MODE
(See 4-17.)
4–8
MODE Switch Settings in HP LaserJet 4+, EPSON FX-850, and
IBM Proprinter XL Modes
The following table shows all the selections you can make with the MODE
switch in the HP LaserJet 4+, EPSON FX-850, and IBM Proprinter XL
modes.
Note
The mode menus and settings that can appear vary according to the current
emulation mode, printer status, and any options that may be installed in the
printer.
Setting Menu
I/F=PARALLEL
I/F=RS-232C
I/F=OPTION
I/F=AUTO
Sub-Setting Menu
HIGH SPEED=ON
BI-DIR=ON
BaudRate= 9600
CodeType=8 bits
Parity =NONE
Stop Bit=1 bits
Xon/Xoff=ON
DTR (ER)=ON
Robust Xon=OFF
exit
Available only when a commercial MIO card has been installed.
MIO Setting
exit
TIME OUT= 5s
PRL Setting
HIGH SPEED=ON
BI-DIR=ON
exit
RS-232C Setting
BaudRate= 9600
CodeType=8 bits
Parity =NONE
Stop Bit=1 bits
Xon/Xoff=ON
DTR (ER)=ON
Robust Xon=OFF
exit
Setting
ON or OFF
ON or OFF
150, 300, 600, 1200, 2400,
4800, 9600, 19200, 38400,
57600, or 115200 baud
7 or 8 bits
NONE, EVEN, or ODD
1 or 2 stop bits
ON or OFF
ON or OFF
ON or OFF
Exit to INTERFACE MODE
The settings available on the
installed MIO card can appear
under the sub-setting menu.
Exit to INTERFACE MODE
1 to 99 seconds
Bi-directional settings for
AUTO
ON or OFF
ON or OFF
Exit to PRL Setting
Parameters for AUTO mode
150, 300, 600, 1200, 2400,
4800, 9600, 19200, 38400,
57600, or 115200 baud
7 or 8 bits
NONE, EVEN, or ODD
1 or 2 stop bits
ON or OFF
ON or OFF
ON or OFF
Exit to RS-232C Setting