Advertisement
INPUT
BUFFER
SIZE
100K
51K
30K
SAVE SETTINGS
Suppose you share this printer with others who want different panel switch
settings or you use the printer with different settings.
Since you can save the current settings in the printer's memory, you can
easily reset the printer to your necessary settings after they are changed. For
resetting the printer, see
Use the panel switches to set the configuration of the printer to your needs
and then enter this mode menu to save your settings. Two sets of user
settings can be saved in the printer as follows:
Display Message
SAVE SETTING 1
SAVE SETTING 2
If you want to check the user settings, you can print out a list of the settings
with the TEST switch. See
Note
No user settings have been factory set.
15 SQUARES
7M
14M
Fig. 4-7 Input buffer size
"RESET Switch" in Chapter
User Setting
Save the current settings as No. 1 in the
printer's memory.
Save the current settings as No. 2 in the
printer's memory.
"TEST Switch" in Chapter
CHAPTER 4 CONTROL PANEL
14M
5 SQUARES
4M
1 SQUARE
30K
26M
RAM SIZE
4.
4.
4–47
Advertisement
Chapters
Troubleshooting
