Advertisement
Test printing on paper, especially envelopes, is
recommended before making a large purchase. The
following types of envelopes are
not recommended for use.
• Envelopes with thick and/or crooked edges
• Damaged, curled, wrinkled, or irregularly shaped
envelopes
• Extremely shiny or highly textured envelopes
• Envelopes with clasps
• Envelopes of baggy construction
• Envelopes not sharply creased
• Embossed envelopes
• Envelopes already printed with a laser printer
• Envelopes pre-printed on the inside
• Envelopes that cannot be arranged uniformly when
placed in a pile
Notes
An area 15 mm (0.6") from the edges of the envelope will not be
printed.
Avoid feeding labels with the carrier sheet exposed. Otherwise, your
printer will be damaged.
When feeding OHP film, the use of a recommended type for laser
printers will ensure optimum printing. For detailed information on the
specification or purchase, please contact your nearest authorized sales
representative or the place of purchase.
PAPER
The printer is designed to work well with most types of xerographic and
bond paper. However, some paper variables may have an effect on print
quality or handling reliability. Always test samples of paper before buying
to ensure that it provides desirable performance. Some important
guidelines when selecting paper are:
1. Supplier should be informed that the paper or envelopes will be used in
a laser printer.
2. Preprinted papers must use inks that can withstand the temperature of
the printers fusing process. (200 degrees centigrade)
3. If selecting a cotton bond paper, paper having a rough surface such as
cockle or laid finished paper, or paper that is wrinkled or puckered may
exhibit degraded performance.
APPENDICES
Appendix–5
Advertisement
Chapters
Troubleshooting
