Removing The Protective Parts - Brother HL-1260 Service Manual

USER'S GUIDE

Removing the Protective Parts

Fig. 2-7 Removing the Protective Parts
2–6
After checking that you have all of the correct parts, temporarily place the
printer where you can easily reach all sides. Remove the protective parts
that secure the printer against damage during transportation, as shown
below:
Note
Keep all packing materials for transporting or storing the printer later.
1. Open the top cover and the upper paper cassette.
2. Remove the protective parts from inside the printer and the cassette.
3. Remove both spacers from the fixing roller.
Protective Parts
Fig. 2-7 Removing the Protective Parts
Spacers
Fig. 2-8 Removing the Spacers