Patented Stay-Safe Disarm (With Enforcer Remotes); Chirp Delete (With Enforcer Remotes); 2Nd Channel Output (With Enforcer Remotes) - SECO-LARM SLI 820R Owner's Manual

PATENTED STAY-SAFE DISARM
Any time your alarm is triggered (the siren is
sounding and the parking lights are flashing), press
the button of the ENFORCER remote once to shut
the siren and flashing parking lights OFF while the
alarm stays completely armed.
CHIRP DELETE (silent arm/disarm) (with ENFORCER remotes)
There are times, especially at night, when you may
not want to hear the siren chirps. There are 2 ways
to delete chirps:
A. One-time delete — Just press the button
any time before you need the chirps deleted.
For instance, press the button before you
press the button to arm the alarm, and the
chirps will not sound, but the parking lights will
still flash. The chirps are restored the next
time you press any transmitter button.
B. Permanent delete — Your dealer can program
your alarm to delete the chirps on a permanent
basis.
NOTE — Either method deletes the arm, disarm,
pre-intrusion, zone bypass, sensor bypass,
emergency disarm, valet, and tamper chirps.
However, they do not affect the flashing parking
lights.

2nd CHANNEL OUTPUT (with ENFORCER remotes)

Your ENFORCER transmitters have an extra channel
to control optional accessories.
2nd channel is commonly used to "pop" the trunk.
To use, press the button for two seconds, either
while the ignition is ON and any door is opened, or
while the ignition is OFF. The alarm will disarm
ENFORCER SLI 820R/-4 Owner's Manual
(only with ENFORCER remotes)
TM
NOTE — This feature is only applicable for the
ENFORCER remotes.
first to prevent the siren
from sounding. (NOTE —
If no doors are connected
directly to your alarm, the 2nd
channel will not operate with the
ignition ON. Ask your dealer for details.)
Silent Arm
→
Silent Disarm
→
→
→
Page 9