Emergency Call For Help (Panic) (With Enforcer Remotes); Sensor Bypass (With Enforcer Remotes); Disarming (With Enforcer Remotes) - SECO-LARM SLI 820R Owner's Manual

Factory keyless entry alarm adapter security system
Table of Contents

Advertisement

ENFORCER SLI 820R/-4 Owner's Manual

EMERGENCY CALL FOR HELP (PANIC) (with ENFORCER remotes)

To trigger the alarm in an emergency, press the
button for 2 seconds. The siren sounds and the
parking lights flash for about 30 seconds.
Stop the siren and the parking lights any time by
pressing any of the four buttons.
Note:
1. Alarm will be in the armed mode if the button
is used to exit the panic mode.

SENSOR BYPASS (with ENFORCER remotes)

This is useful if you know, based on experience, that
your shock sensor (or other add-on sensors) will
false trigger, such as when you park near a
construction site.
Should you wish to bypass your alarm's sensors,
first press the
button to arm the alarm (even if
the alarm is set for passive arming). The siren
chirps and the parking lights flash once (three
times if a zone is bypassed) to confirm armed.
Within three seconds, press the button. The siren
chirps three times and the parking lights flash three
times to confirm sensors are bypassed. The
sensors are automatically restored the next time the

DISARMING (with ENFORCER remotes)

To disarm the alarm, press the
siren chirps twice, the parking lights flash twice
and the LED turns OFF. What happens next
depends on how your alarm is set (ask your dealer):
" Alarm set for active arming with Secure Lock
OFF
The alarm is now completely disarmed.
" Alarm set for active arming with Secure Lock
ON
The system will automatically rearm and relock
the doors 30 seconds later unless a door is
opened during this time. This prevents
accidental disarming. During this 30-second
period, the LED flashes quickly.
Page 8
button. The
TM
TM
2. Alarm will be in the disarmed mode if the
button is used to exit panic mode.
3. Alarm will be in the disarmed mode and
channel 2 output will be activated if the
button is used to exit panic mode
4. Alarm will return to its prior panic mode if the
button is used to exit panic mode.
button is pressed.
NOTE — The chirps to confirm sensor bypass will
not sound if chirp delete is engaged. However, the
parking lights will still flash three times. See
CHIRP DELETE, page 9.
" Alarm set for passive arming
The system will
automatically rearm
itself 30 seconds later.
If a door is opened, the
system temporarily disarms.
Closing the open door will again
cause the system to enter the
30-second rearm period.
NOTE — If set for Secure Lock
lock when the system rearms. Otherwise, the
doors do not automatically relock.
, the doors will
TM
SECO-LARM U.S.A., Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sli 820r-4Sli 820rtcSli 820rtc-4Sli 820rtfSli 820rtf-4

Table of Contents