Appendix 1 - Understanding The Siren Chirps And Light Flashes - SECO-LARM SLI 820R Owner's Manual

ENFORCER SLI 820R/-4 Owner's Manual
Appendix 1 — UNDERSTANDING THE SIREN CHIRPS AND LIGHT
FLASHES
A. 1 chirp/flash:
! When the factory lock button or the
ENFORCER transmitter
pressed, the alarm is armed.
! When a door is closed, the alarm will arm
in 30 seconds (passive arming).
! 30 seconds after the ignition switch is
turned OFF and all doors are closed (or
delayed domelights turn OFF), the alarm is
armed (passive arming).
! Successfully entered the valet mode.
B. 2 chirps/flashes:
! When the factory unlock button or the
ENFORCER transmitter
pressed, the alarm is disarmed.
! Successfully exited the valet mode.
C. 3 chirps/flashes:
! When pressing the factory lock button or
the ENFORCER transmitter
the alarm, indicates the alarm arms even
though it is not set properly (door not
closed, or broken switch, or domelight is
still ON, see ZONE BYPASS on page 4 ).
NOTE: If the delayed domelights are ON
when the arm button is pressed, the siren
will chirp 3 times. This gives the
impression that the door is open when it
may really be closed. To eliminate these
extra chirps and flashes, ask your dealer
about programming the door error indicator
"OFF". However, note that in this case, the
siren will chirp only once if a door is open
when you manually arm the alarm.
Page 10
button is
button is
button to arm
! When pressing the ENFORCER transmitter
button followed by the
indicates sensor is bypassed
(see SENSOR BYPASS on page 8).
! Completed emergency disarm.
! Pre-intrusion warns potential thieves or
vandals who trigger the first stage of any
dual-stage sensor that is connected to the
alarm.
D. 4 flashes only:
! When the factory lock/unlock button or the
ENFORCER transmitter
pressed during the valet mode.
E. 2 Chirps/ 7 flashes:
When pressing the factory unlock button or
!
the ENFORCER transmitter
disarm the alarm, indicates the alarm was
triggered.
NOTE — The chirps for arm, disarm, zone bypass,
sensor bypass, emergency disarm, valet, and
tamper can be deleted. (Ask your dealer.)
button,
or button is
button to
SECO-LARM U.S.A., Inc.