Actions Performed While In A Call; Muting A Call; Placing A Call On Hold; Call Park - Yealink T48G Complete Overview

Hide thumbs Also See for T48G:

Table of Contents

Actions Performed While in a Call

To still hear the caller, but the caller does not hear you.

Press MUTE button during a conversation the power indication LED will blink.



Press MUTE button again to get the microphone to return to normal

conversation.

Placing a call on Hold only places the call on hold at your phone. To place

the call on Hold globally, so anyone can pick the call up, use Call Park.



Press the HOLD button or HOLD softkey to put your active call on hold and

then the corresponding line key will blink.



If there is only one call on hold, press the RESUME softkey or HOLD button

again to retrieve it.



If there is more than one call on hold, press the UP/DOWN button to highlight the

call, press the RESUME softkey or HOLD key to retrieve the call.

Call park is a global hold option, so that the call can be placed on hold and

be picked up from any extension.

 To place a call on park: Press the TRAN button, 6000 and TRAN

again. A recording will announce what line the call is parked on, ie

6001, 6002.

 To pick up a parked call from any phone: Dial the line that the call

is parked on from any phone (ie 6001) and press SEND, call will

immediately connect and be answered

Nemsys LLC : 122 S. St Clair, Toledo, Ohio 43604 : 419-243-3603 : www.nemsys.com

Yealink T48G Guide: A Complete Overview For Nemsys Conversation Clients

Table of Contents