Chapter 1 Introduction; Overview - Supermicro SuperServer 620BT-HNTR User Manual

1.1 Overview

This chapter provides a brief outline of the functions and features of the SuperServer
620BT-H Series. It is based on the X12DPT-B6 motherboard and the CSE-827BQ-R2K60P
chassis.
The following provides an overview of the specifications and capabilities.
Motherboard
Chassis
Processor
Support
Chipset
Memory
Drive Support
Expansion Slots
Networking
I/O Ports
System Cooling
Power
Form Factor
Note1: A Quick Reference Guide can be found on the product page of the Supermicro website.
Note2: The following safety models associated with the 620BT-H Series have been certified
as compliant with CSA or UL models: 827B-R26X12 and 827B-26 .
Chapter 1
Introduction
System Overview
X12DPT-B6
CSE-827BQ-R2K60P
Supports dual Intel Xeon Scalable Family 3rd Gen/4th Gen Series Processors (in Socket P+)
with a thermal design power (TDP) of up to 185W (Air Cooling) or 270W (Liquid Cooling) and
three UPIs (UltraPath Interconnect) of up to 11.2 GT/s per node
Intel PCH C621A (LBG-R)
16 DRAM DIMMs plus two PMem (Intel® Optane™ PMem 200 Series) per node. Up to 4TB
RDIMM, DDR4-3200MHz in 16 memory slots
Front hot-swappable drives include:
12 NVMe/SATA drives for 620BT-HNTR
12 NVMe/SAS/SATA drives for 620BT-HNC8R
Internal M.2 drives per node include:
Default carrier with two M.2 NVMe/SATA SSDs
Optional carrier with two M.2 NVMe SSDs and Marvell HW RAID
Internal Connector:
VROC key header
Two PCIe 4.0 x16 slots for each node
One AIOM or any compliant OCP 3.0 SFF Network Interface Card per node
One dedicated LAN port for BMC per node
Two USB 3.0 ports per node
One VGA port per node
Four 8-cm mid-chassis fans
Two CPU heatsinks per node
One air shroud per node
Two redundant 2600W modules, 80Plus level Titanium power supplies
2U rackmount; (WxHxD) 17.6 x 3.5 x 28.8 in. (447 x 88 x 730 mm)
9
Chapter 1: Introduction