Embroidering; Embroidering Attractive Finishes - Brother PE-400D Operation Manual

EMBROIDERING

Embroidering attractive finishes

2
1
THREAD and NEEDLE
Upper thread - embroidery thread #50
Bobbin thread - embroidery bobbin thread (X81164-001)
THREAD
Perfect needlework cannot be guaranteed with the use of other threads.
Home sewing machine needle 75/11
NEEDLE
Do not use ballpoint needles.
* Use Brother embroidering thread (X81164-001) for the bobbin thread.
Types of embroidery frames
CAUTION
Depending on the size of the pattern and the position of the pattern to be embroidered, it may not
be possible to use the small frames. When using this frame, be sure to check the layout screen
display (refer to page 83) before starting to embroider any patterns. If the frame are used by
mistake, the presser foot may strike the frame, which could cause injury.
74
Stabilizers
– Use stabilizers to create beautiful embroider without puck-
ering or poor stitch conformation. Iron-on Stabilizers are
recommended especially for lightweight fabrics and/or
stretchable fabrics. For certain fabrics you might wish to
use a thick stabilizer or two layers of stabilizer.
1
1 Stabilizer
2 Fabric
* We recommend Brother Iron-on stabilizers that can be torn
2
off after you're finished.
– Use a stabilizer that is larger than the size of the hoop so
that the entire stabilizer can be hooped with the cloth as
shown in the diagram.
This is to prevent the fabric from sagging.
1 Size of embroidery hoop
2 Stabilizers
– When embroidering heavyweight fabrics or fabrics that
cannot be ironed, you can use the stabilizers by placing
them under the cloth without actually attaching it.
Medium frame
1 10 cm (H) × 10 cm (W)
Small frame (Optional)
2 2 cm (H) × 6 cm (W) (for embroidering initials)