Brother PE-400D Operation Manual page 9

1
2
I
III
5
6
7
4
6
5
3
4
II
1
J
1
2
3
A. MAIN POWER SWITCH AND
CONNECTORS
1 Power socket
Use to connect machine to power supply.
2 Main power switch
Use to turn on/off the main power.
3 Air vents
4 Card slot
Slot for memory card insertion.
5 Foot controller jack
Use to connect the foot controller.
CAUTION
– When leaving the sewing machine unat-
tended, the main switch of the machine must
be switched off or the plug must be removed
from the socket-outlet.
– When servicing the sewing machine, or
when removing covers or changing bulbs,
the machine or the electrical set must be
unplugged.
– For U.S.A. only
This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electric shock, this plug is intended
to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, re-
verse the plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not modify the plug in any way.
B. FLATBED ATTACHMENT WITH
ACCESSORY COMPARTMENT
I Slide accessory case to the left and out of the
machine.
II Each presser foot has a letter.
1 Presser foot letter
III ACCESSORY LIST
The location of each accessory is shown in fig-
ure III.
No. Part Name
1
Buttonhole foot "A"
2
Overcasting foot "G"
3
Seam ripper
4
Bobbin
5
Needle set
6
Spool cap (Large)
7
Spool cap (Small)
* Always use BROTHER accessories with this
machine.
Part Code
X57789-101
X51162-001
X54243-001
X80309-001
XA6627-001
130012-053
XA5752-001