Curt Manufacturing 45950 Installation Manual

INSTALLATION MANUAL

Level of Difficulty

Easy

Weight Capacity

Gross trailer weight (GTW)
Tongue weight (TW)

Parts List

Item Qty Description
1 1 Adjustable shank*
2 1 Pintle mount
3 2 Pin*
4 2 Clip*
5 4 Hex bolt
6 4 Lock washer
*Sold separately

Tools Required

Socket, 3/4" Torque wrench

Maintenance

Mild automotive detergent may be used to
clean the product. Do not use dish detergent,
abrasive cleaners, abrasive pads, wire
brushes or other similar products that
may damage the finish.
CURTMFG.COM
• NEED ASSISTANCE?

WARNING

Never exceed the vehicle manufacturer's recommended towing capacity. The ratings of
the mount system are intended to represent the capability of the product and in no way
reflect the ratings or capacity of the towing system it is being used with. The consumer
or operator are strongly advised to learn the ratings of the various components of the
towing system and never exceed the limits of the lowest rated component being used.
15,000 lbs.
Never hook up trailer safety chains to the mount system. Ensure the safety
1,500 lbs.
chains operate freely around the mount system and do not become entangled.
Product Photo
NOTICE
Before You Begin installation, read all instructions thoroughly.
Prior to towing, ensure all fasteners are tight and all structural components are sound.
Using a torque wrench and 1/2" socket, torque hardware to 75 lb-ft.

Product Registration

CURT Group stands behind our products with industry-leading warranties.
Provide feedback and help us to improve our products by registering your purchase at:
warranty.curtgroup.com/surveys
• 877.287.8634 • 45950-INS-RA • PAGE 1
45950