Change Batteries - Ecom UNO Operation Manual

Change Batteries

NOTICE
The two 1.5 V AA batteries must be replaced when the battery
capacity indicator flashes.
1. Open the lid of the battery compartment.
2. Remove used batteries.
3. Replace batteries with new batteries.
4. Slide the cover onto the battery compartment.
Setup
Settings can be made in the setup menu. To do this, press the ON/OFF key
for about 3 seconds after switching on the unit.
The following functions can be set:
Number
0
1
2
3
• Select a function with the ON/OFF key.
• Setting is made with the HOLD and the setting key.
• Press and hold the ON/OFF key for about 3 seconds to exit the setup
menu.
8
Value Function
0 – 1 1 = Set to Factory Setting
0 – 90 Automatic Switch-off
1 – 9 Display Damping
0 – 1 1 = with Zero Correction
Factory Setting
0
15
3
1