Laser Notices - Brother 4000CN User Manual

E
International
E S ® is a U.S. registered mark.
NERGY TAR
The purpose of the International E
popularization of energy-efficient office equipments.
As an E S
NERGY TAR
the E S
NERGY TAR

Laser Notices

Laser Safety (120 V Model Only)
This printer is certified as a Class I laser product under the U.S. Department of Health
and Human Services (DHHS) Radiation Performance Standard according to the
Radiation Control for Health and Safety Act of 1968. This means that the printer does not
produce hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within protective
housings and external covers, the laser beam cannot escape from the machine during
any phase of user operation. However, the machine contains 5-milliwat, 700-800
nanometer wavelength, GaAIAs laser diodes. Direct (or indirect reflected) eye contact
with the laser beam might cause serious eye damage. Safety precautions and interlock
mechanisms have been designed to prevent any possible laser beam exposure to the
operator.
FDA Regulations (120 V Model Only)
U.S. Food and Drug Administration (FDA) has implemented regulations for laser products
manufactured on and after August 2, 1976. Compliance is mandatory for products marketed
in the United States. The label shown on the back of the printer indicates compliance with
the FDA regulations and must be attached to laser products marketed in the United States.
MANUFACTURED:
BROTHER INDUSTRIES, LTD.
15-1 Naeshiro-cho, Mizuho-ku, Nagoya, 467-8561 Japan
This product complies with FDA radiation performance standards, 21 CFR
Subchapter J.
Caution: Use of controls, adjustments or the performance of procedures other than those
specified in this manual may result in hazardous radiation exposure.
S
NERGY TAR
NERGY
® Partner, Brother Industries, Ltd. has determined that this product meets
guidelines for energy efficiency.
®
®
Compliance Statement
S ® Program is to promote the development and
TAR
vii